Please login or register.

Login with username, password and session length

Author Topic: PM20 Specifications  (Read 3055 times)

Offline Barry

  • Full Member
  • ***
  • Posts: 147
    • Barry Eames, the, um, Legend
PM20 Specifications
« on: January 12, 2015, 10:27:29 AM »
Over the years I have received requests for PM20 information.
Back about 2008 or so I took a screen capture of the old Parker web site which had all the specs and features of the PM series listed.

I converted it to a PDF but unfortunately PhotoBucket will not accept that file format, so I am unable to share that original page. So, I did the next best thing and translated it to plain text. Hope this is helpful:

PARKER PM -20 - SPECIFICATIONS


BODY
Wood: Quilt Bubinga or Flame Maple top, Mahogany body
Construction: Quilt Bubinga or Flame Maple top, Mahogany body
Finish: Polyurethane
Bridge: String through design
Vibrato System: N/A

NECK
Wood: Mahogany
Neck  Design: Solid one piece
Neck-Body  Joint: Traditional set-neck
Scale: 25.5'
Number of  Frets: 22
Fret  Material: Nickel silver
Fret  Size: .060"  high..090 wide
Fret Board: Ebony
Fretboard Shape: 10-13"  conical  form
Neck Shape: Width--Regular Thickness--Fat
Finish: Polyurethane
Nut: Black polycarbonate
Nut Width: 1.650
String Spacing: Bridge--2.038  Nut--1.325
Truss  Rod: Traditional  design
Tuners: Grover 18:1 Ratio

ELECTRONICS
Mag  Pickups: Parker Stingers  -Alnico
Mag.  Config:  Number--2  Config--HH
Mag.  PU Select: 3-way mag pickup selection with push-pull tap
Piezo System: N/A
PreAmp/Mixer: N/A
Other Controls: Mag volume with push/pull coil tap andmag tone with push/pull coil tap
Output: Mono

MISCELLANEOUS
Weight: 7 pounds
Strings: .009"-.042"
Other Features: N/A
Case/Bag: Parker P-Series custom bag
Love one woman, many vintage guitars.
Or...was it the other way around?

PM-20 Hornet Red Bubinga owner & recovering GAS addict