Please login or register.

Login with username, password and session length

Author Topic: Bronze fly  (Read 1708 times)

Offline mark jacob

  • Newbie
  • *
  • Posts: 5
Bronze fly
« on: September 06, 2015, 02:37:19 PM »
I wanted to remove the bridge. I have a terrible 60 cycle hum. If I open the back. And pull out on the shielded cable a bit the buzzing stops. So that means I need to solder something or replace the wire. Can't figure out how to get the bridge out. I don't want to ruin anything. Any help would be appreciated thank you
Mark jacob

Re: Bronze fly

Offline lucgravely

  • Hero Member
  • *****
  • Posts: 1340
  • the odds have it.
Re: Bronze fly
« Reply #1 on: September 08, 2015, 07:08:06 AM »
Why remove the bridge?
Luc Gravely
Parker Fly Mojo Singlecut
Parker NiteFly NV1
Mesa/Boogie Mark I
1966 Fender BandMaster
A few pedals...

Re: Bronze fly

Offline guitarmanuk

  • Hero Member
  • *****
  • Posts: 847
Re: Bronze fly
« Reply #2 on: September 08, 2015, 07:35:42 AM »
If it is like mine, then there should be 3 holes on the back behind the bridge which contain screws to remove the bridge.
David

1997 Parker Fly Classic transparent Teal Green
1997 Parker Fly Concert Butterscotch