Please login or register.

Login with username, password and session length

Author Topic: 97' Nitefly fret replacment?  (Read 2995 times)

Offline Corey

  • Newbie
  • *
  • Posts: 37
Re: 97' Nitefly fret replacment?
« Reply #30 on: September 14, 2016, 09:05:57 PM »
Dave at USM mentioned Radcliff to me back in May via email. He also said if I needed a fret or two they had some donor Flys still they could pull from. FWIW.

I thought the Fly's were even smaller.

The goal, if your going to go through the trouble of replacing your frets on a Nitefly, is to get a fret at least .050" in height. That would correspond to a Dunlop 6110. A 6100 is even better at .055"

Corey

Re: 97' Nitefly fret replacment?

Offline Big Swifty

  • Sr. Member
  • ****
  • Posts: 327
Re: 97' Nitefly fret replacment?
« Reply #31 on: September 17, 2016, 10:28:34 PM »
Came across these guys in my www meanderings, seems likely they'd use the same system for frets, might be worth a conversation:

http://emeraldguitars.com

B.S.
94 Fly Deluxe
2010 DF 524
The system can't get you in your dreams.

Re: 97' Nitefly fret replacment?

Offline Corey

  • Newbie
  • *
  • Posts: 37
Re: 97' Nitefly fret replacment?
« Reply #32 on: October 23, 2016, 06:16:55 PM »
Thanks for the emerald link!  :)

Although they also might use the Radcliffe as OEM, contour shape might be slightly different.


Corey