Please login or register.

Login with username, password and session length


can anybody know how to repair the saddle ?????

disconnect fishman saddle
0 (0%)
Inside connection of a fishman piezo saddle
1 (100%)

Total Members Voted: 1

Author Topic: Piezo Saddle reair ..... Need help !!!!  (Read 944 times)

Offline elbatty

  • Newbie
  • *
  • Posts: 1
Piezo Saddle reair ..... Need help !!!!
« on: May 23, 2018, 02:31:45 AM »
There was a cable coming out of my fishman piezo saddle, it's disconected. i removed the tip of the saddle where the string go and check inside and there's no soldering point inside the saddle or in the back of the other piece..... How i can i fix it ??? what can i do ???? I need your help Please !!!!!

Re: Piezo Saddle reair ..... Need help !!!!

Offline billy

  • Hero Member
  • *****
  • Posts: 1750
Re: Piezo Saddle reair ..... Need help !!!!
« Reply #1 on: May 24, 2018, 10:28:22 AM »
It's not entirely clear in your post what happened.  The original styles had the piezos soldered to a strip of copper mounted on the underside of the bridge.  I'm guessing that's where the wire came loose.

If you search for "saddle swap" on the forum, you should find a few posts that include pictures.  FYI You'll probably have to remove the bridge to do the repair but otherwise it isn't too hard.  If you need to swap the saddle completely, you'll need to know which style and there's a few.  Worst case you can retrofit a new set of graphtech saddles per the parker site's instructions under the support menu.

[always the beautiful answer who asks a more beautiful question.  e. e. cummings]