Please login or register.

Login with username, password and session length

Author Topic: nitefly m PCB jumper question.  (Read 2510 times)

Offline flyingoctopus

  • Newbie
  • *
  • Posts: 16
    • http://www.evenafter.com
nitefly m PCB jumper question.
« on: March 12, 2005, 07:24:33 PM »
Hi,

I have recently purchased a nitefly M and in the control cavity there is a small pcb with 2 sets of jumber pins by the piezo gain pot. The top two pins are currently shorted with a jumper and the bottom two are not.

Does anyone know what these are for or whether it is set up correctly?

 

nitefly m PCB jumper question.

Offline kristian

  • Newbie
  • *
  • Posts: 7
nitefly m PCB jumper question.
« Reply #1 on: March 14, 2005, 01:18:25 PM »
I submitted a reply to your same question under the Fly section.  Check it out.
Kristian Strom
Parker Guitars Repair Department