Please login or register.

Login with username, password and session length

Author Topic: Any recommendations for a fret dressing in CO.  (Read 118 times)

Offline Robbie

  • Newbie
  • *
  • Posts: 5
Any recommendations for a fret dressing in CO.
« on: October 11, 2018, 09:46:46 PM »
Hello, I’m new to this forum and forums in general. I appreciate in advance any helpful info. I’ve been gigging with a 97 Parker fly deluxe for the last 18 Years. I have two 97’s. My first guitar’s Frets got real bad so my wife surprised me with another 97 fly. Now the second one is starting to show some wear. I live in grand lake CO, about an hour and a half from Denver.  Summit county is also close. Does anyone recommend a luthier familiar with our guitars in this area? Thanks again for any leads.

Re: Any recommendations for a fret dressing in CO.

Offline Mr303

  • Sr. Member
  • ****
  • Posts: 380
Re: Any recommendations for a fret dressing in CO.
« Reply #1 on: October 12, 2018, 10:37:18 AM »
I’m in Denver and have little experience with luthiers here...luckily I haven’t needed much work done.

Colfax Guitar Shop has a good reputation https://www.colfaxguitars.com/guitar-repair
They do both acoustic and electric repairs.

Dan Lenz owns Axe Haven on north Federal and is a really good guy and works on traditional electrics but I can’t speak to his abilities for Parker’s or their glued on SS frets.  He does nice work but is semi-retired ...

Matt McGibney is a good guitar maker in Thornton who might do fret work for extra money. https://www.mcgibneyguitars.com/

Forum member TaxguyDave is building his own guitars now and has a store on Reverb.com he loves Parker’s and has a few. Perhaps you could try contacting him through his Reverb store.  He’s in east Denver.
Estes Electrostring on Reverb.com

Make certain whoever works on it knows about the glued on frets.
  TaxguyDave would know but others won’t, guaranteed

Dave is the only luthier on this list I know personally.

Good luck
« Last Edit: October 12, 2018, 10:47:59 AM by Mr303 »
'94 Fly hard tail
'97 Fly Deluxe
'08 PM20 Pro 3x3 headstock
PDF 105
PDF 70 modded
and a few others that are boat anchors.
‘43 Epi Blackstone
Godin 5th ave p90

Re: Any recommendations for a fret dressing in CO.

Offline vjmanzo

  • Full Member
  • ***
  • Posts: 176
  • ~V.J.
    • vjmanzo.com
Re: Any recommendations for a fret dressing in CO.
« Reply #2 on: October 12, 2018, 11:17:33 AM »
The knowledge base and sense of community on this forum never fails to impress me!
Fly Mojo (2005), Fly Deluxe [w/Sustainiac] (2007), Fly Mojo [w/Sustainiac] (2008), Fly Concert (1997), Fly Classic (2003), Fly Deluxe (1997), Fly Artist (2010), Fly Deluxe [redwood, hardtail] (1993), Fly Bass FB-4 (2003) || More Info

Re: Any recommendations for a fret dressing in CO.

Offline Robbie

  • Newbie
  • *
  • Posts: 5
Re: Any recommendations for a fret dressing in CO.
« Reply #3 on: October 12, 2018, 01:24:23 PM »
Thanx mr303. I will look into this after work.

Re: Any recommendations for a fret dressing in CO.

Offline Mr303

  • Sr. Member
  • ****
  • Posts: 380
Re: Any recommendations for a fret dressing in CO.
« Reply #4 on: October 14, 2018, 07:05:02 PM »
Thanx mr303. I will look into this after work.

Talked with TaxguyDave today and mentioned Fly fret repair.....SS fret work requires special hardened tools/files etc...possible lifting of frets, a reglue, resulting poor alignment etc etc etc.....problems most luthiers don’t want to tackle or could create without knowledge or experience. 

You might have to seriously consider sending it some place like Shazrock to ensure quality work.

Again, good luck
'94 Fly hard tail
'97 Fly Deluxe
'08 PM20 Pro 3x3 headstock
PDF 105
PDF 70 modded
and a few others that are boat anchors.
‘43 Epi Blackstone
Godin 5th ave p90

Re: Any recommendations for a fret dressing in CO.

Offline Paul Marossy

  • Hero Member
  • *****
  • Posts: 7317
  • Excuse me while I kiss The Fly
Re: Any recommendations for a fret dressing in CO.
« Reply #5 on: October 15, 2018, 10:12:27 AM »
Thanx mr303. I will look into this after work.

Talked with TaxguyDave today and mentioned Fly fret repair.....SS fret work requires special hardened tools/files etc...possible lifting of frets, a reglue, resulting poor alignment etc etc etc.....problems most luthiers don’t want to tackle or could create without knowledge or experience. 

You might have to seriously consider sending it some place like Shazrock to ensure quality work.

Again, good luck

Anything on a Parker Fly is like alien technology to 99.7% of luthiers

Re: Any recommendations for a fret dressing in CO.

Offline billy

  • Hero Member
  • *****
  • Posts: 1711
Re: Any recommendations for a fret dressing in CO.
« Reply #6 on: October 15, 2018, 12:33:45 PM »
Thanx mr303. I will look into this after work.

Talked with TaxguyDave today and mentioned Fly fret repair.....SS fret work requires special hardened tools/files etc...possible lifting of frets, a reglue, resulting poor alignment etc etc etc.....problems most luthiers don’t want to tackle or could create without knowledge or experience. 

You might have to seriously consider sending it some place like Shazrock to ensure quality work.

Again, good luck

Anything on a Parker Fly is like alien technology to 99.7% of luthiers

agree with this statement about 99.7% luthiers, especially the "techs" who work in your local box store. 

However, the need for special tools, etc to do a fret dress is overstated.  I did a mojo shell with several high frets using standard files and got great results and without issue to the guitar, tools, etc.  Bigswifty's post here on the forum on doing the same work to his fly is what finally inspired me to try it.  (This was a scrap shell I got on ebay due to a slightly botched fretboard that had a few high frets.)

So if you take it somewhere, be sure they understand how the frets are attached and that they are stainless steel, but don't believe all the hype that it makes them impossible to dress.  It IS a little more effort, but really not that much.
Billy

[always the beautiful answer who asks a more beautiful question.  e. e. cummings]

Re: Any recommendations for a fret dressing in CO.

Offline Robbie

  • Newbie
  • *
  • Posts: 5
Re: Any recommendations for a fret dressing in CO.
« Reply #7 on: October 15, 2018, 08:29:42 PM »
Thanx again,
Looks like I need to take some time during the day to make some calls around Denver. I always get to this at night. I’m 2hours up the hill from the city or I would just check them out in person. This is for sure the first time I’ve been frustrated with my Parker love. I even have a custom tattoo with one on me.  Hopefully someone down there will be familiar with them. I would assume so. If not, I will be in the market for another late nineties fly when I burn through my current (2nd) one.

Re: Any recommendations for a fret dressing in CO.

Offline Robbie

  • Newbie
  • *
  • Posts: 5
Re: Any recommendations for a fret dressing in CO.
« Reply #8 on: October 15, 2018, 08:52:49 PM »
While I wish I had the money or space to be a collector of guitars, I do not. My Parker’s get played, a lot, and hard. Any advice on keeping my frets round in the future? I’ve always used d’addario 009’s. Three gigs then a fresh set. Do any other strings wear frets less? Is there anything else I could do ? I would love for these guitars to last a lifetime

Re: Any recommendations for a fret dressing in CO.

Offline billy

  • Hero Member
  • *****
  • Posts: 1711
Re: Any recommendations for a fret dressing in CO.
« Reply #9 on: October 15, 2018, 09:02:16 PM »
Good luck finding someone local. If they are willing but have questions send them here. Alternatively search for a plek owner who is willing to do your fly and ship it to them.

As for keeping your frets in shape as long as possible, my experience has been best when I wipe the strings after I play. Any crud that sticks to the bottom can act like a little file on the frets.

Unfortunately though some of us just have more acidic sweat and finger oils; I’m not sure what can be done about that.
Billy

[always the beautiful answer who asks a more beautiful question.  e. e. cummings]

Re: Any recommendations for a fret dressing in CO.

Offline Robbie

  • Newbie
  • *
  • Posts: 5
Re: Any recommendations for a fret dressing in CO.
« Reply #10 on: October 15, 2018, 09:14:05 PM »
Is it ok to use quick fret? I never have, but I also never thought about body oil being bad for frets. I would have thought it would be good for them. I often grab nose or head grease for my fingers. If I’m mid rip, I lick my fingers. Sound gross, but it does the trick

Re: Any recommendations for a fret dressing in CO.

Offline vjmanzo

  • Full Member
  • ***
  • Posts: 176
  • ~V.J.
    • vjmanzo.com
Re: Any recommendations for a fret dressing in CO.
« Reply #11 on: October 15, 2018, 10:49:17 PM »
The Fly manual says just use water, so I wouldn’t use anything other than water.
Fly Mojo (2005), Fly Deluxe [w/Sustainiac] (2007), Fly Mojo [w/Sustainiac] (2008), Fly Concert (1997), Fly Classic (2003), Fly Deluxe (1997), Fly Artist (2010), Fly Deluxe [redwood, hardtail] (1993), Fly Bass FB-4 (2003) || More Info