Please login or register.

Login with username, password and session length

Author Topic: Remove Bridge  (Read 1375 times)

Offline .malva

  • Newbie
  • *
  • Posts: 12
    • http://www.myspace.com/enstro
Remove Bridge
« on: May 22, 2009, 02:06:01 PM »
Greetings from Greece. I have a Fly Deluxe (refined) and I want to remove the bridge so I can clean it up. I removed the spring but i don't know how to remove the bridge. Any help? Thanks

"I will be dancing the whole night..."
"I will be dancing the whole night..."

Remove Bridge

Offline 908ssp

  • Hero Member
  • *****
  • Posts: 6365
Remove Bridge
« Reply #1 on: May 22, 2009, 03:52:06 PM »
Turn the two height adjuster screws on the back side counter clockwise. Best to turn each screw half a revolution and then go to the other screw. That will raise it up till it comes clear of the screws then you can just lift the bridge out. Make sure you pull some piezo cable out of the cavity so you don't tug on the connections.



Alex

« Last Edit: May 22, 2009, 03:52:52 PM by 908ssp »
Alex

[IMG]http://i146.photobucket.com/albums/r245/908ssp/ThumbNails/_1010802.jpg[/IMG

Remove Bridge

Offline .malva

  • Newbie
  • *
  • Posts: 12
    • http://www.myspace.com/enstro
Remove Bridge
« Reply #2 on: May 22, 2009, 05:34:24 PM »
Thank you very much.

:D

"I will be dancing the whole night..."
"I will be dancing the whole night..."